uu.seUppsala University Publications
Change search
ReferencesLink to record
Permanent link

Direct link
Brake squeal reduction by particle embedding in the disc surface: influence of treated pattern
Uppsala University, Teknisk-naturvetenskapliga vetenskapsområdet, Technology, Department of Engineering Sciences.
Manuscript (Other academic)
URN: urn:nbn:se:uu:diva-94651OAI: oai:DiVA.org:uu-94651DiVA: diva2:168573
Available from: 2006-09-01 Created: 2006-09-01 Last updated: 2010-01-13Bibliographically approved
In thesis
1. Mechanisms and Phenomena in Braking and Gripping
Open this publication in new window or tab >>Mechanisms and Phenomena in Braking and Gripping
2006 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Applications relying on a high static friction include various types of fixtures, couplings, bolted joints, torsion joints, etc. The common characteristic of these applications is that they rely on the friction force to maintain the relative position of two mating surfaces. Also applications relying on high dynamic friction are common, the main example being brakes, where a low friction could be devastating.

The plateau model for the friction of brakes has been refined. By using advanced electron microscopy, it has been shown that during braking a partly amorphous friction film, comprising nanosized iron oxide agglomerates, dissipates the friction energy. The film is only about 100 nm thick. It is separated from the underlying less mobile material by a thin boundary. The actual braking power is thus localised to this very thin film, leading to remarkably high power densities. In a typical case it was estimated to 40 GW/dm3.

Squeal and vibrations are critical problems for brakes. The present work has shown that a textured disc pattern may counteract squeal efficiently. The most successful pattern has spiral shaped arms in which wear resistant ceramic particles are embedded. The different wear characteristics of treated and untreated disc surface lead to an elevation of the patterned area above the rest of the disc. In a related experiment, laser technique was used to inject the particles deeper into the disc surface, and thus prolonging the time of silence.

Textured diamond surfaces have been used to study the influence of load, repeated scratching and surface roughness on the static coefficient of friction. It was shown that these surfaces were remarkably stable at high friction levels. A maximum load limit was found above which the coefficient of friction falls. This and a number of other factors were found important for the successful design of high-friction joints.

Place, publisher, year, edition, pages
Uppsala: Acta Universitatis Upsaliensis, 2006. 49 p.
Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, ISSN 1651-6214 ; 199
Materials science, Friction, Brake, Texture, Squeal, Materialvetenskap
urn:nbn:se:uu:diva-6974 (URN)91-554-6597-8 (ISBN)
Public defence
2006-09-22, Siegbahnsalen, Ångströmlaboratoriet, Regementsvägen 1, Uppsala, 10:00
Available from: 2006-09-01 Created: 2006-09-01Bibliographically approved

Open Access in DiVA

No full text

By organisation
Department of Engineering Sciences

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 205 hits
ReferencesLink to record
Permanent link

Direct link