Dynamic characterization and modelling of a dual-axis beam steering device for performance understanding, optimization, and control design
2013 (English)In: Journal of Micromechanics and Microengineering, ISSN 0960-1317, E-ISSN 1361-6439, Vol. 23, no 4, 045020- p.Article in journal (Refereed) Published
This paper presents a lumped thermal model of a dual-axis laser micromirror device for beam steering in a free-space optical (FSO) communication system, designed for fractionated spacecraft. An FSO communication system provides several advantages, such as larger bandwidth, smaller size and weight of the communication payload and less power consumption. A dual-axis mirror device is designed and realized using microelectromechanical systems technology. The fabrication is based on a double-sided, bulk micromachining process, where the mirror actuates thermally by joints consisting of v-grooves filled with the SU-8 polymer. The size of the device, consisting of a mirror, which is deflectable versus its frame in one direction, and through deflection of the frame in the other, is 15.4 × 10.4 × 0.3 mm3. In order to further characterize and understand the micromirror device, a Simulink state-space model of the actuator is set up using thermal and mechanical properties from a realized actuator. A deviation of less than 2% between the modelled and measured devices was obtained in an actuating temperature range of 20–200 °C. The model of the physical device was examined by evaluating its performance in vacuum, and by changing physical parameters, such as thickness and material composition. By this, design parameters were evaluated for performance gain and usability. For example, the crosstalk between the two actuators deflecting the mirror along its two axes in atmospheric pressure is projected to go down from 97% to 6% when changing the frame material from silicon to silicon dioxide. A feedback control system was also designed around the model in order to examine the possibility to make a robust control system for the physical device. In conclusion, the model of the actuator presented in this paper can be used for further understanding and development of the actuator system.
Place, publisher, year, edition, pages
2013. Vol. 23, no 4, 045020- p.
Research subject Engineering Science with specialization in Microsystems Technology; Engineering Science with specialization in Electronics
IdentifiersURN: urn:nbn:se:uu:diva-185627DOI: 10.1088/0960-1317/23/4/045020ISI: 000316299900021OAI: oai:DiVA.org:uu-185627DiVA: diva2:572289