uu.seUppsala University Publications
Change search
ReferencesLink to record
Permanent link

Direct link
Non-Invasive Technologies for Condition Monitoring of Synchronous Motors
Uppsala University, Disciplinary Domain of Science and Technology, Technology, Department of Engineering Sciences, Electricity.
2014 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

The modern industry today is highly dependent on electric motors of differenttypes and sizes. Synchronous motors are used in applications where a fixedspeed is desired. These machines are often found in high power applicationswhere they are preferred over induction motors due to their higher efficiency.Synchronous motors represent large investments and typically drive processeswhere downtime results in significant capital losses. Thus, detecting faults atan early stage can help avoid catastrophic failures and be useful in thescheduling of maintenance. In order to detect faulty conditions before theyterminate in a failure, machine operators must perform some kind ofmonitoring on the machines. Typically, the more critical the machine is for aprocess, the more effort is put on monitoring it. Before building a monitoringsystem for a machine, one must first decide what parameters that should bemonitored. The obvious desire is to find a parameter that is easy and cheap tomeasure and at the same time can give detailed information about the workingstate of the machine.The aim of this thesis is to evaluate whether the exciter stator current is anadequate parameter to use within a monitoring system for synchronous motors.The evaluation has been made through simulations of two different setups;One using a synchronous motor in the 20 MW range fed by a synchronousmachine type exciter. And the other using the same motor but instead fed byan induction machine type exciter. It has been found that the exciter statorcurrent can be used for detection of faults associated to the rectifier and statorshort circuit of the main machine stator winding. It has not been possible todetect turn-to-turn faults in the main machine rotor.The work has been performed at ABB Corporate Research in Västerås fromJune until December 2013.

Place, publisher, year, edition, pages
UPTEC ES, ISSN 1650-8300 ; 13047
Keyword [en]
Condition Monitoring, Co-simulation, Synchronous Motors
National Category
Other Electrical Engineering, Electronic Engineering, Information Engineering
URN: urn:nbn:se:uu:diva-219247OAI: oai:DiVA.org:uu-219247DiVA: diva2:698708
External cooperation
ABB Corporate Research
Educational program
Master Programme in Energy Systems Engineering
Available from: 2014-03-12 Created: 2014-02-24 Last updated: 2014-03-12Bibliographically approved

Open Access in DiVA

Non-Invasive Technologies for Condition Monitoring of Synchronous Motors(1329 kB)1046 downloads
File information
File name FULLTEXT01.pdfFile size 1329 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Other Electrical Engineering, Electronic Engineering, Information Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 1046 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 685 hits
ReferencesLink to record
Permanent link

Direct link