uu.seUppsala University Publications
Change search
ReferencesLink to record
Permanent link

Direct link
Modeling wood fiber deformation caused by vapor expansion during steam explosion of wood
Uppsala University, Disciplinary Domain of Science and Technology, Technology, Department of Engineering Sciences, Applied Mechanics.
2014 (English)In: Wood Science and Technology, ISSN 0043-7719, E-ISSN 1432-5225, Vol. 48, no 2, 353-372 p.Article in journal (Refereed) Published
Abstract [en]

Steam explosion is a process used to enhance enzyme penetration and digestibility of wood. Wood chips are processed with high-pressure steam for a limited time, and the bonding between polysaccharides and lignin is weakened. After this processing, the pressure is rapidly reduced to induce steam explosion where the vapor inside a fiber expands and exerts pressure on the fiber walls. This pressure causes fiber deformation and breakage. In this study, fiber deformation caused by vapor expansion was simulated by single wood fibers using finite element modeling. When pressure is applied inside a fiber, it is likely to break from the corner and midway between two adjacent corners. The fiber is modeled with four layers (P, S1, S2, and S3). Although the P, S1, and S3 layers are very thin, they significantly prevent fiber deformation. The fibers with a thin wall and a low micro-fibril angle (MFA) deform more than the fibers with a thick wall and a higher MFA. It was found that the shape of the fiber plays an important role in its deformation. The areas of localized strain are the most likely places for fiber splitting. Essentially, fiber wall damage is more likely to occur in (1) thin-walled fibers, i.e., earlywood, (2) fibers with damaged P and S1 layers, (3) fibers with low MFAs, and (4) fibers with irregular cross-sections. Different chemical pretreatments, fractionation procedures, and selections of raw materials can accordingly be considered to produce easily steam-exploded materials.

Place, publisher, year, edition, pages
2014. Vol. 48, no 2, 353-372 p.
National Category
Engineering and Technology
Research subject
Engineering science with specialization in Applied Mechanics
URN: urn:nbn:se:uu:diva-220983DOI: 10.1007/s00226-013-0613-0ISI: 000331721300011OAI: oai:DiVA.org:uu-220983DiVA: diva2:707726
Available from: 2014-03-25 Created: 2014-03-24 Last updated: 2014-07-21Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full text

Search in DiVA

By author/editor
Gamstedt, E Kristofer
By organisation
Applied Mechanics
In the same journal
Wood Science and Technology
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 424 hits
ReferencesLink to record
Permanent link

Direct link