uu.seUppsala University Publications
Change search
ReferencesLink to record
Permanent link

Direct link
Simplified finite element bearing modeling: with NX Nastran
Uppsala University, Disciplinary Domain of Science and Technology, Technology, Department of Engineering Sciences, Applied Mechanics.
2015 (English)Independent thesis Basic level (professional degree), 10 credits / 15 HE creditsStudent thesis
Abstract [en]

This report was produced at the request of ABB Robotics and the work was conducted at their facilities in Västerås, Sweden.

In the development of industrial robots the structures are slimmed to increase the accuracy and speed. When conducting finite element analysis on the robots the accuracy of the component modelling and definitions of the boundary conditions becomes more important. One such component is the ball bearing which consist of several parts and has a nonlinear behavior where the balls are in contact with the rings.

The task given was to develop new methods to model roller bearings in Siemens finite element modelling software NX Nastran. Then conduct a strain measurement, to compare the methods to real experimental values. The goal with the report is to find one or more methods to model roller bearings, with accurate results, that can beused in their development work.

The report was conducted by first doing a study on bearings and finite element modeling, and learning to use the software NX Nastran. Then the development of the methods were done by generating ideas for bearing models and testing them on simple structures. Nine methods was produced and a tenth, the method used to model bearings today, was used as a reference. The methods was used to build bearing models in a finite element model of a six axis robot wrist.

Simulations were done on the models with different load cases and the results were compared to a strain measurement of the wrists real counterpart. Only six of the models were analyzed in the result, since four of the models returned results that were deemed unusable.

When compiling the result data no model was found to accurately recreate the stresses in every load case. Three methods, that allow deformation, performed similarly. One of them is suggested to be used as modelling method in the future. Worst of the methods, according to the results compiled, was found to be the method used today. It fails to describe local stresses around the bearing. For continued work it is suggested that linear contact elements is studied further. Four out of five models constructed with linear contact elements failed to return satisfactory results.

Place, publisher, year, edition, pages
2015. , 72 p.
Keyword [en]
ball bearing, simplified, model, FEM
National Category
Mechanical Engineering
URN: urn:nbn:se:uu:diva-255398ISRN: UTH-INGUTB-EX-M-2015/21-SEOAI: oai:DiVA.org:uu-255398DiVA: diva2:822049
External cooperation
ABB Robotics
Educational program
Bachelor Programme in Mechanical Engineering
Available from: 2015-06-17 Created: 2015-06-16 Last updated: 2015-06-17Bibliographically approved

Open Access in DiVA

fulltext(5008 kB)2291 downloads
File information
File name FULLTEXT02.pdfFile size 5008 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Adolfsson, Erik
By organisation
Applied Mechanics
Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 2291 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 729 hits
ReferencesLink to record
Permanent link

Direct link