Processdesign av emulsionsberedningssystem
Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE creditsStudent thesisAlternative title
Process Design of Emulsion Preparation System (English)
At the request of Fresenius Kabi an emulsion preparation system was designed with a maximum production capacity of 15 L and minimum of 3 L emulsion. The system was required to consist of one oil-tank, one pre-emulsion tank, two storage tanks and one homogenizer. The storage tanks were positioned on a movable carriage on the left side of the homogenizer and the pre-emulsion tank and oil tank was placed on a separate frame on the right side of the homogenizer. All tanks were equipped with individual temperature control and a stand-alone parallel cleaning system was designed.
The system also had to be optimized for the specific process and extensive calculations were done. The emulsion system was designed using CAD-software and produced a detailed 3D-model. The tanks were designed from scratch and all other parts of the system consist of standardized components readily available. A list of the components in the system with manufacturer article number of all components was also produced. Actual drawings for the tanks were also made. The 3D-model and the list of components provide a good base for future construction of the system.
Place, publisher, year, edition, pages
2016. , 37 p.
TVE, TVE 16 058 juni
emulsion, intrevenous nutrition, process, oil, water, system
emulsion, intravenös näringstillförsel, dropp, process, system, olja, vatten
Chemical Process Engineering
IdentifiersURN: urn:nbn:se:uu:diva-295838OAI: oai:DiVA.org:uu-295838DiVA: diva2:935100
Master Programme in Chemical Engineering
2016-06-02, fakultetsrummet, Ångströmslaboratoriet, Uppsala, 14:35 (English)
Bertilsson Forsberg, PetterBoman, Mats, ProfessorBaraldi, Enrico, Professor