Logo: to the web site of Uppsala University

uu.sePublications from Uppsala University
Change search
Link to record
Permanent link

Direct link
Alternative names
Publications (10 of 55) Show all publications
Dettmann, L., Gebert, F. & Naylor, A. J. (2026). Investigating Interfacial Chemistry for Pre-passivated Lithium-ion Battery Electrodes Employing Non-flammable Methyl(2,2,2-trifluoroethyl) Carbonate Electrolytes. RSC Applied Interfaces, 3(3), 764-775
Open this publication in new window or tab >>Investigating Interfacial Chemistry for Pre-passivated Lithium-ion Battery Electrodes Employing Non-flammable Methyl(2,2,2-trifluoroethyl) Carbonate Electrolytes
2026 (English)In: RSC Applied Interfaces, E-ISSN 2755-3701, Vol. 3, no 3, p. 764-775Article in journal (Refereed) Published
Abstract [en]

The transition to non-flammable electrolytes is essential to enhance the safety of rechargeable lithium-ion batteries in the context of rapid global electrification. However, these next-generation electrolytes often exhibit inferior electrochemical performance compared to conventional carbonate-based systems, hindering their practical application. Recent studies suggest that pre-passivating electrodes with conventional electrolytes can enhance performance for some next-generation electrolytes through interphase stabilization, yet a mechanistic understanding of this improvement remains to be established. In this work, we combine detailed electrochemical analysis with synchrotron-based hard X-ray photoelectron spectroscopy to investigate how pre-passivated electrodes influence the stability and performance of cells containing non-flammable electrolytes based on the solvent methyl(2,2,2-trifluoroethyl)carbonate (FEMC). We identify the anode solid electrolyte interphase (SEI) as the critical limiting factor towards use of FEMC electrolytes, with pre-passivation in conventional electrolytes significantly mitigating continuous electrolyte decomposition. Furthermore, our results show that the cathode electrolyte interphase (CEI) also plays a vital role, and that optimal performance is achieved by combining an SEI formed in a conventional electrolyte with a CEI formed in the FEMC electrolyte. These findings provide direct electrochemical and spectroscopic evidence for interphase-driven performance improvements, offering a practical pathway to advance non-flammable electrolyte technologies.

Place, publisher, year, edition, pages
Royal Society of Chemistry, 2026
National Category
Materials Chemistry
Identifiers
urn:nbn:se:uu:diva-581988 (URN)10.1039/d5lf00364d (DOI)001710607200001 ()2-s2.0-105032231238 (Scopus ID)
Available from: 2026-03-11 Created: 2026-03-11 Last updated: 2026-08-14Bibliographically approved
Shi, X., Naylor, A. J., Fuchs, T., Schröder, S., Weber, F., Henss, A., . . . Berger, R. (2026). Mechanical properties of cathode-electrolyte interphase layers in high-voltage lithium-ion batteries. Journal of Materials Chemistry A, 14(30), 19454-19468
Open this publication in new window or tab >>Mechanical properties of cathode-electrolyte interphase layers in high-voltage lithium-ion batteries
Show others...
2026 (English)In: Journal of Materials Chemistry A, ISSN 2050-7488, E-ISSN 2050-7496, Vol. 14, no 30, p. 19454-19468Article in journal (Refereed) Published
Abstract [en]

LiNi0.5Mn1.5O4 (LNMO) is a promising cathode material owing to its high operating potential of 4.75 V vs. Li+/Li. However, the high potential triggers interfacial instability, such as electrolyte oxidation. A mechanically robust cathode-electrolyte interphase (CEI) is essential for maintaining structural integrity and ensuring reliable performance of high-voltage lithium-ion batteries. CEI layer thickness is often under 20 nm, making the assessment of its elastic properties challenging. We applied an amplitude-modulated/frequency-modulated scanning force microscopy method to enable quantitative mechanical characterization of thin CEI layers on rough composite electrode surfaces. We systematically varied the number of battery cycles and investigated the morphology and elastic modulus of the interphase layers on LNMO cathodes. The pristine crystalline LNMO surface exhibited an elastic modulus of approximately 126±20 GPa, whereas the binder/carbon (b/c) regions had a modulus of 1.9±0.1 GPa. After only 5 cycles the elastic modulus on LNMO decreased to 3.2±1.2 GPa, indicating an LNMO passivation by CEI growth. After 200 cycles, the elastic modulus became homogeneous with the moduli on the LNMO and b/c regions reaching 3.9±0.8 GPa and 3.9±0.4 GPa, respectively. This mechanical convergence is supported by a convergence in chemical composition of the interphase between the LNMO and b/c regions. We also observed a compositional shift from ether-rich oligomers to a more oxidized, carbonyl-rich organic network. The final stabilized modulus of ≈4 GPa reflects an organic-dominated interphase with enhanced intermolecular interactions. Inorganic species are likely buried beneath the organic-rich top layer. This work provides understanding of interfacial stability and establishes a robust and reproducible framework for quantifying the elastic modulus of interphase layers within composite electrodes, providing insights for the design of stable high-voltage battery systems.

Place, publisher, year, edition, pages
Royal Society of Chemistry, 2026
National Category
Materials Chemistry Condensed Matter Physics
Identifiers
urn:nbn:se:uu:diva-588266 (URN)10.1039/d5ta09458e (DOI)001742655600001 ()2-s2.0-105036241105 (Scopus ID)
Available from: 2026-06-05 Created: 2026-06-05 Last updated: 2026-06-05Bibliographically approved
Herrera, C. N., Capone, F., Fantin, R., Cadiou, F., Mozhzhukhina, N., Jacquet, Q., . . . Benayad, A. (2026). Standardization of post-mortem photoelectron spectroscopy studies of battery interphases: from cell assembly to data analysis. Journal of Energy Storage, 170, Article ID 122820.
Open this publication in new window or tab >>Standardization of post-mortem photoelectron spectroscopy studies of battery interphases: from cell assembly to data analysis
Show others...
2026 (English)In: Journal of Energy Storage, ISSN 2352-152X, E-ISSN 2352-1538, Vol. 170, article id 122820Article in journal (Refereed) Published
Abstract [en]

Understanding the chemical structure of the solid electrolyte interphase that forms and evolves during lithium-ion battery cycling is critical for advancing battery technology. This complex task often requires the use of postmortem protocols to extract the electrodes in controlled states of charge and prepare them for further characterization and analysis. Over decades of research and optimization, the scientific community has established and shared post-mortem workflow protocols tailored to specific techniques. However, numerous sources of artifacts can disturb this workflow, introducing experimental uncertainties at various stages, from electrode manufacturing to data interpretation. Here we present the results of a round-robin inter-laboratory study using post-mortem X-ray photoemission spectroscopy to characterize the solid electrolyte interphase formed on graphite electrode after cycling in two different electrolytes. Several leading European research teams, expert in battery manufacturing and characterization by X-ray photoemission spectroscopy, participated in a meticulously designed post-mortem workflow. The goal was to identify the sources of consistency and disparity in the results and their impact on the scientific conclusions. Moreover, human-induced bias and errors were quantified throughout key steps, from cell assembly to photoemission core level peak fitting and interpretation. Based on our findings, we offer key recommendations for identifying and minimizing sources of artifacts in the analysis of the solid electrolyte interphase chemical composition. Effectively addressing these challenges is essential for improving both the performance and longevity of batteries.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Post-mortem, XPS, SEI, Round-robin
National Category
Materials Chemistry
Identifiers
urn:nbn:se:uu:diva-592339 (URN)10.1016/j.est.2026.122820 (DOI)001785362200001 ()2-s2.0-105040634138 (Scopus ID)
Funder
EU, Horizon 2020, 957189StandUp
Available from: 2026-06-29 Created: 2026-06-29 Last updated: 2026-06-29Bibliographically approved
Zhao, L., Costa, S. I. .., Chen, Y., Fitzpatrick, J. R., Naylor, A. J., Kolosov, O. & Tapia-Ruiz, N. (2025). A Comparative Study of Solid Electrolyte Interphase Evolution in Ether and Ester-Based Electrolytes for Na-ion Batteries. PRX Energy, 4(3), Article ID 033002.
Open this publication in new window or tab >>A Comparative Study of Solid Electrolyte Interphase Evolution in Ether and Ester-Based Electrolytes for Na-ion Batteries
Show others...
2025 (English)In: PRX Energy, E-ISSN 2768-5608, Vol. 4, no 3, article id 033002Article in journal (Refereed) Published
Abstract [en]

The solid electrolyte interphase (SEI) largely determines the electrochemical performance of negative electrodes in sodium-ion batteries (SIBs). Ether-based electrolytes, such as diglyme, have been shown to form a more stable and thinner SEI on sodium anodes than traditional commercial ester-based electrolytes. Nonetheless, variations in the detailed evolution of the chemical composition and mechanical strength of the SEIs formed in these two electrolytic solutions during the electrochemical process have rarely been investigated. In this work, we conduct a comparative study of the SEI formed in diglyme-based and carbonate-based electrolytes with Na2⁢Ti3⁢O7(NTO) as a proof-of-concept material, using energy-tuned photoelectron spectroscopy, operando electrochemical atomic force microscopy, and electrochemical techniques. The results show that diglyme forms a thin, homogeneous, and stable SEI with a well-defined inorganic-organic bilayer structure, as opposed to ester-based electrolytes, which form a thicker, nonuniform, and dynamically changing SEI with randomly distributed inorganic-organic structure. Moreover, the less resistive and higher capacitive interfacial processes induced by the diglyme-based electrolyte decrease the overall battery impedance. These advantages enable the NTO anode to exhibit superior specific capacity, cycle stability, and rate capability. This study provides an in-depth view of the factors behind the electrolyte-dependent performance of SIB anodes, which could inform the design and pairing of electrolytes with electrode materials in rechargeable batteries.

Place, publisher, year, edition, pages
American Physical Society, 2025
National Category
Materials Chemistry
Identifiers
urn:nbn:se:uu:diva-572194 (URN)10.1103/jfvb-wp5w (DOI)2-s2.0-105022622457 (Scopus ID)
Available from: 2025-11-28 Created: 2025-11-28 Last updated: 2026-07-02Bibliographically approved
Mardi, S., Naylor, A. J., Mindemark, J. & Hernández, G. (2025). A fluorine-free Li-ion battery features comparable cycling performance to a highly-fluorinated equivalent. Journal of Materials Chemistry A, 13(46), 39903-39914
Open this publication in new window or tab >>A fluorine-free Li-ion battery features comparable cycling performance to a highly-fluorinated equivalent
2025 (English)In: Journal of Materials Chemistry A, ISSN 2050-7488, E-ISSN 2050-7496, Vol. 13, no 46, p. 39903-39914Article in journal (Refereed) Published
Abstract [en]

Fluorinated compounds, including the polyvinylidene fluoride (PVdF) binder and lithium hexafluorophosphate salt, are considered essential components in lithium-ion batteries due to their ability to provide good performance and cycle life. However, these compounds raise potential environmental concerns, as they can lead to the formation of toxic, corrosive and persistent compounds, such as hydrofluoric acid, phosphorus pentafluoride (PF5) and per- and polyfluoroalkyl substances. In this study, the effects of a fluorine-free electrolyte consisting of lithium bis(oxalato)borate (LiBOB) salt with the vinylene carbonate (VC) additive, and an aqueous-based binder based on carboxymethyl cellulose (CMC) and latex are investigated for full cells combining a silicon–graphite composite anode with LiNi0.6Mn0.2Co0.2O2 (NMC622) cathodes. Higher capacity retention is obtained at C/2 after 500 cycles with the fluorine-free binder in the cathode (61% and 65% for the fluorine-free and fluorinated electrolytes, respectively) compared to the PVdF-based binder (58% and 56%, respectively). X-ray photoelectron spectroscopy analysis of the passivating layers on the cathode and anode across the four systems revealed a F-rich interfacial composition in the presence of the fluorinated electrolyte, while the fluorine-free electrolyte led to the formation of oxygen-rich layers at the interphases. Despite the chemical differences, both layers protect the cathode and anode during cycling, resulting in similar electrochemical performance. Moreover, the solid electrolyte interphase composition on the anode is dependent on the cathode's formulation. The aqueous-processed cathode resulted in higher coverage of the active material, which mitigated salt decomposition and facilitated the formation of a more stable passivating layer. This contributed to higher capacity retention despite a lower initial discharge capacity compared to the PVdF-based cathode. This study demonstrates the potential of fluorine-free components (electrolyte and a binder with an aqueous-processed cathode) to achieve high-energy-density full cells with comparable performance to conventional highly fluorinated lithium-ion batteries.

Place, publisher, year, edition, pages
Royal Society of Chemistry, 2025
National Category
Materials Chemistry
Identifiers
urn:nbn:se:uu:diva-572195 (URN)10.1039/d5ta06760j (DOI)001608522500001 ()2-s2.0-105022820285 (Scopus ID)
Funder
EU, Horizon 2020, 875514Swedish Research Council, 2020-00207
Available from: 2025-11-28 Created: 2025-11-28 Last updated: 2026-03-16Bibliographically approved
Fitzpatrick, J. R., Murdock, B. E., Thakur, P. K., Lee, T.-L., Fearn, S., Naylor, A. J., . . . Tapia-Ruiz, N. (2025). An in-depth Study of the Solid Electrolyte Interphase Compositional Evolution in Sodium-Ion Batteries: Unravelling the Effects of a Na Metal Counter Electrode on the SEI. Advanced Science, 12(32), Article ID e04717.
Open this publication in new window or tab >>An in-depth Study of the Solid Electrolyte Interphase Compositional Evolution in Sodium-Ion Batteries: Unravelling the Effects of a Na Metal Counter Electrode on the SEI
Show others...
2025 (English)In: Advanced Science, E-ISSN 2198-3844, Vol. 12, no 32, article id e04717Article in journal (Refereed) Published
Abstract [en]

A comprehensive understanding of the solid electrolyte interphase (SEI) is crucial for ensuring long-term battery stability. This is particularly pertinent in sodium-ion batteries (NIBs), where the SEI remains poorly understood, and investigations are typically undertaken in half-cell configurations with sodium metal as the counter electrode. Na metal is known to be highly reactive with common carbonate-based electrolytes; nevertheless, its effects on SEI formation at the working electrode are largely unexplored. This work investigates the evolution of the SEI in NIBs during cycling, with an emphasis on the consequences of using a sodium metal counter electrode. Advanced analytical techniques, including hard X-ray photoelectron spectroscopy (HAXPES) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), are used to obtain depth-resolved insights into the chemical composition and structural changes of the SEI on hard carbon anodes during cycling. The findings demonstrate that the cell configuration has a significant impact on SEI evolution and, by extension, battery performance. These findings suggest that full-cell studies are necessary to better simulate practical operating conditions, challenging traditional half-cell experiments.

Place, publisher, year, edition, pages
John Wiley & Sons, 2025
Keywords
hard carbon, sodium-ion batteries, solid electrolyte interphase, X-ray photoelectron spectroscopy
National Category
Materials Chemistry Inorganic Chemistry
Identifiers
urn:nbn:se:uu:diva-577994 (URN)10.1002/advs.202504717 (DOI)001513015100001 ()40548457 (PubMedID)2-s2.0-105008751793 (Scopus ID)
Available from: 2026-01-29 Created: 2026-01-29 Last updated: 2026-01-29Bibliographically approved
Lu, Z., Patranika, T., Naylor, A. J., Mindemark, J., Tardif, S., Hernández, G. & Lyonnard, S. (2025). Formation and Evolution of the Solid Electrolyte Interphase on Silicon Electrodes from Fluorine-Free Electrolytes. Small, 21(9), Article ID 2410654.
Open this publication in new window or tab >>Formation and Evolution of the Solid Electrolyte Interphase on Silicon Electrodes from Fluorine-Free Electrolytes
Show others...
2025 (English)In: Small, ISSN 1613-6810, E-ISSN 1613-6829, Vol. 21, no 9, article id 2410654Article in journal (Refereed) Published
Abstract [en]

With the increasing attention to energy storage solutions, a growing emphasis has been placed on environmentally compatible electrolytes tailored for lithium-ion batteries. This study investigates the surface behavior of Si wafers as model systems cycled with a fluorine-free electrolyte based on lithium bis(oxalato)borate (LiBOB), with and without the additive vinylene carbonate (VC). By utilizing operando X-ray reflectivity (XRR) and ex situ X-ray photoelectron spectroscopy (XPS), the intricate processes involved in solid electrolyte interphase (SEI) formation is elucidated, SiO2/Si (de)lithiation, and the impact of the VC additive. Three distinct stages in SEI evolution during lithiation and delithiation are identified: SEI formation, subsequent densification and growth, and decrease in SEI thickness during delithiation, which collectively demonstrate the breathing behavior of the SEI during cycling. The addition of VC is found to mitigate LiBOB decomposition during cycling and promote a smoother SEI layer. Moreover, lithium trapping within the Si wafer post-delithiation is observed for both electrolytes but to a lesser extent with the addition of VC. This study offers structural and chemical insights into the fundamental processes governing SEI formation and Si wafer (de)lithiation in LiBOB-based electrolytes, with implications for designing environmentally friendly lithium-ion batteries.

Place, publisher, year, edition, pages
Wiley-VCH Verlagsgesellschaft, 2025
Keywords
fluorine-free electrolyte, lithium-ion battery, Operando X-ray reflectivity, silicon electrode, solid electrolyte interphase, X-ray photoelectron spectroscopy
National Category
Materials Chemistry Inorganic Chemistry
Identifiers
urn:nbn:se:uu:diva-556779 (URN)10.1002/smll.202410654 (DOI)001389878800001 ()39757716 (PubMedID)2-s2.0-85214412808 (Scopus ID)
Funder
EU, Horizon 2020, 875514EU, Horizon 2020, A32-2 842StandUp
Available from: 2025-05-19 Created: 2025-05-19 Last updated: 2025-05-19Bibliographically approved
Dettmann, L., Colbin, L. O. & Naylor, A. J. (2025). Influence of Battery Electrode Chemistry on Electrolyte Decomposition. Advanced Materials Interfaces, 12(13), Article ID 2500262.
Open this publication in new window or tab >>Influence of Battery Electrode Chemistry on Electrolyte Decomposition
2025 (English)In: Advanced Materials Interfaces, ISSN 2196-7350, Vol. 12, no 13, article id 2500262Article in journal (Refereed) Published
Abstract [en]

In rechargeable batteries a stable electrode-electrolyte interface is the key for achieving high coulombic efficiency, rate capability, and cycle lifetime. Numerous studies are published on how the electrolyte influences the interface and whether it leads to the formation of a stable solid-electrolyte-interphase (SEI) on the anode surface. However, the influence of the electrode material upon formation of the SEI has so far not been a focus. In this study, the influence of battery electrode chemistry on electrolyte decomposition is highlighted by investigating three different electrode materials in model battery systems: carbonaceous (glassy carbon), semi-conducting (silicon), and metallic (copper). Electrochemical methods including linear sweep voltammetry and chronoamperometry in combination with hard X-ray photoelectron spectroscopy are used to unravel how and in which order SEI components nucleate depending on surface material and potential. The impact of the alkali metal cation (lithium vs sodium) upon SEI formation is additionally investigated. The findings reveal that SEI formation is highly dependent on the electrode material, reduction potential, and choice of alkali cation, emphasizing its non-universal nature. These insights highlight the need for a thorough understanding of SEI formation mechanisms when designing advanced electrode materials and electrolytes for next-generation batteries.

Place, publisher, year, edition, pages
Wiley-VCH Verlagsgesellschaft, 2025
National Category
Materials Chemistry
Identifiers
urn:nbn:se:uu:diva-563842 (URN)10.1002/admi.202500262 (DOI)001498576500001 ()2-s2.0-105006987075 (Scopus ID)
Funder
Swedish Energy Agency, P2021‐90019Swedish Energy Agency, P2022‐00045
Available from: 2025-07-16 Created: 2025-07-16 Last updated: 2026-08-04Bibliographically approved
Baghban Shemirani, M., Gebert, F. & Naylor, A. J. (2025). Influence of bis(2,2,2-trifluoroethyl) carbonate flame retarding co-solvent on interfacial chemistry in carbonate ester lithium-ion battery electrolytes. RSC Applied Interfaces, 2(3), 764-771
Open this publication in new window or tab >>Influence of bis(2,2,2-trifluoroethyl) carbonate flame retarding co-solvent on interfacial chemistry in carbonate ester lithium-ion battery electrolytes
2025 (English)In: RSC Applied Interfaces, E-ISSN 2755-3701, Vol. 2, no 3, p. 764-771Article in journal (Refereed) Published
Abstract [en]

The development of flame-retarding battery electrolytes may be achieved by the inclusion of non-flammable solvents in existing conventional electrolyte formulations. Here the use of one such promising solvent, bis(2,2,2-trifluoroethyl) carbonate (TFEC), mixed with conventional lithium-ion battery solvents ethylene carbonate and ethyl methyl carbonate, achieves comparable or superior electrochemical performance to a state-of-the-art benchmark (up to 90% capacity retention between 5th and 200th cycle, compared with 76% for the benchmark). Further electrochemical analysis indicates comparable cell resistance and rate capability, though a TFEC content beyond 90 vol% leads to increased resistance and rapid capacity fading. This was found to be caused by lithium trapping in the graphite electrodes and formation of a thinner solid electrolyte interphase with a distinct chemistry, as determined by X-ray photoelectron spectroscopy. TFEC's low Li+-solvating ability likely significantly influences these electrolytes' physico-chemical and electrochemical behaviour.

Place, publisher, year, edition, pages
Royal Society of Chemistry, 2025
National Category
Materials Chemistry Inorganic Chemistry
Identifiers
urn:nbn:se:uu:diva-565985 (URN)10.1039/d4lf00405a (DOI)001552962700001 ()2-s2.0-105005331194 (Scopus ID)
Funder
Swedish Energy Agency, P2021-90019Swedish Energy Agency, P2022-00045StandUp
Available from: 2025-09-05 Created: 2025-09-05 Last updated: 2026-08-14Bibliographically approved
van Ekeren, W., Dettmann, L., Tesfamhret, Y., Naylor, A. J. & Younesi, R. (2025). Investigation of Electrolyte Salts in Non‐Flammable Triethyl Phosphate for Sodium‐Ion Batteries. Batteries & Supercaps, 8(3), Article ID e202400489.
Open this publication in new window or tab >>Investigation of Electrolyte Salts in Non‐Flammable Triethyl Phosphate for Sodium‐Ion Batteries
Show others...
2025 (English)In: Batteries & Supercaps, E-ISSN 2566-6223, Vol. 8, no 3, article id e202400489Article in journal (Refereed) Published
Abstract [en]

Five different electrolyte salts, namely NaBF4, NaClO4, NaDFOB, NaFSI and NaPF6, were evaluated in non-flammable triethyl phosphate (TEP) based electrolyte solutions in sodium-ion full-cells using high-mass loading Prussian white and hard carbon electrodes. Their impact on the viscosity, ionic conductivity and solvation structure was analyzed, revealing that NaFSI-based electrolytes exhibited a stronger interaction with TEP and less ion-pairing than the other salts, resulting in the highest ionic conductivity at a concentration of 0.8 m (mol/kg). Galvanostatic cycling experiments showed that none of the electrolyte salts dissolved in TEP forms an efficient passivation layer. However, adding 1 wt.% vinylene carbonate (VC) significantly improved cycling performance for the cells with NaBF4, NaDFOB or NaFSI, but not with NaClO4 or NaPF6. Additionally, NaFSI in TEP with 1 wt.% VC electrolyte solution showed minimal gas evolution during the formation cycling (<8 mbar). In a 1 Ah multilayer pouch cell, 0.8 m NaFSI in TEP with 1 wt.% VC showed promising results with 88 % capacity retention after 200 cycles. X-ray photoelectron spectroscopy analysis indicated that the addition of VC results in the formation of a thin SEI and minimized TEP decomposition, particularly for 0.8 m NaFSI TEP with 1 wt.% VC. This study lays the groundwork for safer liquid electrolytes and integrating them into near-to-commercial cell setups.

Place, publisher, year, edition, pages
John Wiley & Sons, 2025
National Category
Chemical Sciences
Identifiers
urn:nbn:se:uu:diva-545605 (URN)10.1002/batt.202400489 (DOI)001358158700001 ()2-s2.0-105001060011 (Scopus ID)
Funder
Swedish Energy AgencyVinnova
Available from: 2024-12-18 Created: 2024-12-18 Last updated: 2026-08-04Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0001-5641-7778

Search in DiVA

Show all publications