Li-ion batteries (LIBs) play a crucial role in the transition from fossil fuel to renewable energy sources by providing energy storage solutions for numerous applications. The modern high energy density LIBs were realised largely by the stabilisation of the electrode/electrolyte interface at the negative electrode with the solid electrolyte interphase (SEI). The SEI forms through electrolyte reduction during the first couple of charge/discharge cycles. Despite extensive optimisation of LIBs through electrolyte and SEI development, fundamental understanding of the formation, composition, structure and operating mechanism of the SEI is yet to be established. In order to address this gap, operando analytical techniques and model electrode/electrolyte systems were developed and applied to systematically investigate the formation and evolution of gaseous, soluble and solid reaction products. The thesis provides insights into the mechanisms behind SEI formation as driven by several important electrolyte solvents and additives, namely ethylene carbonate (EC), propylene carbonate (PC), vinylene carbonate (VC), lithium bis(oxalato)borate (LiBOB), 1,3,2-dioxathiolane 2,2-dioxide (DTD), and prop-1-ene-1,3-sultone (PES). Key findings include that EC and PC are reduced via identical reaction pathways, but with product of different solubilities, which in turn explains the difference in their ability to passivate the electrode surface. For the layer-forming additives, reduction pathways and their impact on the SEI passivation properties were identified and discussed. Although VC significantly reduces the layer thickness, the SEI is much denser and therefore more resistive to ion transport. LiBOB, DTD and PES were all found to have similar influence, namely passivate the electrode and suppress EC reduction, but each with their own peculiarities. LiBOB was found to be reduced already at 1.8 V vs. Li+/Li to form primarily Li-oxalate based SEI along with electrolyte soluble borates. DTD reduces to primarily gaseous and solid products with a comparatively thicker SEI at 1.4 V vs. Li+/Li. PES leads primarily to electrolyte-soluble product at 1.4 V vs. Li+/Li, which in a subsequent step generates a comparatively thinner SEI. Both VC and PES reduced H2 evolution, which was explained by the H2O and H scavenging ability of their unsaturated carbon-carbon bonds. Based on the collective findings herein, an effective layer-former suppresses the reduction of both the electrolyte and its impurities and generates a 10 nm thick and dense SEI comprised primarily of inorganic Li-species. The insights into the SEI formation process on a fundamental level of the aforementioned solvents and additives showcase the ability of complementary operando analytical techniques to unravel the complexity of the elusive SEI. The insights thus gained guide the optimisation and development of electrolytes for current and future LIB chemistries.
The “ethylene carbonate (EC)–propylene carbonate (PC) mystery” has puzzled electrochemists for decades. Surprisingly, the minor structural difference between PC and EC, a methyl vis-à-vis a proton, prevents PC unlike EC to form a stable solid electrolyte interphase (SEI) on carbon (C), which along with the popularity of PC has impeded the development of Li-ion batteries with many years. Despite several hypotheses, the fundamental reason remains debated largely due to the lack of sufficient experimental evidence. Herein, SEI formed as a result of EC and PC reductions are analyzed by two state-of-the-art operando techniques, online electrochemical mass spectrometry and electrochemical quartz crystal microbalance with dissipation monitoring. Although both EC- and PC-based electrolytes appear to have virtually identical reaction pathways, PC is reduced much more extensively than EC and forms a much thicker SEI. However, while the SEI derived from EC remains on the electrode, PC reduction products redissolve in the electrolyte leaving the bare C electrode behind. The presented study illustrates the complex scheme of competing electro-/chemical reactions behind SEI formation and provides further scientific details needed to eventually form a consensus of the processes governing electrode/electrolyte interphases in Li-ion batteries.
The solid electrolyte interphase (SEI) is arguably one of the most critical components of the Li-ion cell. Despite decades of studies of the SEI, its intrinsic complexity and the lack of suitable characterization tools still prevent a real consensus on the governing mechanisms to be reached. Herein, operando Raman spectroscopy supported by complimentary online electrochemical mass spectrometry is employed to study the SEI formation on Au in a model electrolyte based on LiClO4 in ethylene carbonate (EC). Both the electrolyte itself and cell contaminants, such as O2, CO2, and H2O, contribute in stepwise electro-/chemical processes to the build-up of the SEI. Effects associated with electrode/electrolyte double-layer charging, electrode adsorbate polarization (stark effect), and SEI dissolution are discerned. Lithium carbonate and lithium oxide are identified as major products formed already ≈2 V versus Li+/Li. Although Raman spectroscopy provides deeper insights into the underlying mechanisms, complementary techniques are necessary to support spectral interpretations. Classical challenges in the field of surface science, such as contaminations, have to be systematically addressed if the puzzle of the SEI ever will be completed.
Electrolyte additives are indispensable to enhance the performance of Li-ion batteries. Lithium bis(oxalato)borate (LiBOB) has been explored for many years, as it improves both cathode and anode performance. No consensus regarding its reaction mechanisms has, however, been established. A model operando study combining attenuated total reflection infrared spectroscopy (ATR-FTIR), electrochemical quartz crystal microbalance (EQCM), and online electrochemical mass spectrometry (OEMS) is herein presented to elucidate LiBOB reduction and electrode/electrolyte interphases thus formed. Reduction of the BOB– ion sets in at ∼1.8 V with solid lithium oxalate and soluble oxalatoborates as the main products. The reduced BOB– ion also reacts with itself and its environment to evolve CO2, which in turn impacts the interphase formed on the negative electrode. This study provides further insights into the reduction pathways of LiBOB and how they contribute to the interphase formation.