Logo: to the web site of Uppsala University

The interfacial reactions in sodium-ion batteries (SIBs) are not well understood yet. The formation of a stable solid electrolyte interphase (SEI) in SIBs is still challenging due to the higher solubility of the SEI components compared to lithium analogues. This study therefore aims to shed light on the dissolution of SEI influenced by the electrolyte chemistry. By conducting electrochemical tests with extended open circuit pauses, and using surface spectroscopy, we determine the extent of self-discharge due to SEI dissolution. Instead of using a conventional separator, beta-alumina was used as sodium-conductive membrane to avoid crosstalk between the working and sodium-metal counter electrode. The relative capacity loss after a pause of 50 hours in the tested electrolyte systems ranges up to 30 %. The solubility of typical inorganic SEI species like NaF and Na2CO3 was determined. The electrolytes were then saturated by those SEI species in order to oppose ageing due to the dissolution of the SEI.

Sodium-ion batteries have become a potential alternative to Li-ion batteries due to the abundance of sodium resources. Sodium-ion cathode materials have been widely studied with particular focus on layered oxide lithium analogues. Generally, the capacity is limited by the redox processes of transition metals. Recently, however, the redox participation of oxygen gained a lot of research interest. Here the Mg-doped cathode material P2-Na0.56Mg0.04Ni0.19Mn0.70O2 is studied, which is shown to exhibit a good capacity (ca. 120 mAh/g) and high average operating voltage (ca. 3.5 V vs. Na+/Na). Due to the Mg-doping, the material exhibits a reversible phase transition above 4.3 V, which is attractive in terms of lifetime stability. In this study, we combine X-ray photoelectron spectroscopy, X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy techniques to shed light on both, cationic and anionic contributions towards charge compensation.

The inclusion of nickel and manganese in layered sodium metal oxide cathodes for sodium ion batteries is known to improve stability, but the redox behaviour at high voltage is poorly understood. Here in situ X-ray spectroscopy studies show that the redox behaviour of oxygen anions can account for an increase in specific capacity at high voltages. Rechargeable sodium-ion batteries have recently attracted renewed interest as an alternative to Li-ion batteries for electric energy storage applications, because of the low cost and wide availability of sodium resources. Thus, the electrochemical energy storage community has been devoting increased attention to designing new cathode materials for sodium-ion batteries. Here we investigate P2- Na0.78Co1/2Mn1/3Ni1/6O2 as a cathode material for sodium ion batteries. The main focus is to understand the mechanism of the electrochemical performance of this material, especially differences observed in redox reactions at high potentials. Between 4.2 V and 4.5 V, the material delivers a reversible capacity which is studied in detail using advanced analytical techniques. In situ X-ray diffraction reveals the reversibility of the P2-type structure of the material. Combined soft X-ray absorption spectroscopy and resonant inelastic X-ray scattering demonstrates that Na deintercalation at high voltages is charge compensated by formation of localized electron holes on oxygen atoms.

Increasing dependence on rechargeable batteries for energy storage calls for the improvement of energy density of batteries. Toward this goal, introduction of positive electrode materials with high voltage and/or high capacity is in high demand. The use of oxygen chemistry in lithium and sodium layered oxides has been of interest to achieve high capacity. Nevertheless, a complete understanding of oxygen-based redox processes remains elusive especially in sodium ion batteries. Herein, a novel P3-type Na0.67Ni0.2Mn0.8O2, synthesized at low temperature, exhibits oxygen redox activity in high potentials. Characterization using a range of spectroscopic techniques reveals the anionic redox activity is stabilized by the reduction of Ni, because of the strong Ni 3d-O 2p hybridization states created during charge. This observation suggests that different route of oxygen redox processes occur in P3 structure materials, which can lead to the exploration of oxygen redox chemistry for further development in rechargeable batteries.

Lithium-rich layered oxides and sodium layered oxides represent attractive positive electrode materials exhibiting excess capacity delivered by additional oxygen redox activity. However, structural degradation in the bulk and detrimental reactions with the electrolyte on the surface often occur, leading to limited reversibility of oxygen redox processes. Here, we present the properties of P3-type Na0.67Mg0.2Mn0.8O2 synthesized under both air and oxygen. Both materials exhibit stable cycling performance in the voltage range of 1.8-3.8 V, where the Mn3+/Mn4+ redox couple entirely dominates the electrochemical reaction. Oxygen redox activity is triggered for both compounds in the wider voltage window 1.8-4.3 V with typical large voltage hysteresis from nonbonding O 2p states generated by substituted Mg. Interestingly, for the compound prepared under oxygen, an additional novel reversible oxygen redox activity is shown with an exceptionally small voltage hysteresis (20 mV). The presence of vacancies in the transition-metal layers is shown to play a critical role not only in forming unpaired O 2p states independent of substituted elements but also in stabilizing the P3 structure during charge with reduced structural transformation to the O'3 phase at the end of discharge. This study reveals the important role of vacancies in P3-type sodium layered oxides to increase energy density using both cationic and anionic redox processes.

Sodium transition metal oxides with a layered structure are one of the most widely studied cathode materials for Na+-ion batteries. Since the mobility of Na+ in such cathode materials is a key factor that governs the performance of material, electrochemical and muon spin rotation and relaxation techniques are here used to reveal the Na+-ion mobility in a P2-type Na0.5MgxNi0.17-xMn0.83O2 (x = 0, 0.02, 0.05 and 0.07) cathode material. Combining electrochemical techniques such as galvanostatic cycling, cyclic voltammetry, and the galvanostatic intermittent titration technique with mu+SR, we have successfully extracted both self-diffusion and chemical-diffusion under a potential gradient, which are essential to understand the electrode material from an atomic-scale viewpoint. The results indicate that a small amount of Mg substitution has strong effects on the cycling performance and the Na+ mobility. Amongst the tested cathode systems, it was found that the composition with a Mg content of x = 0.02 resulted in the best cycling stability and highest Na+ mobility based on electrochemical and mu+SR results. The current study clearly shows that for developing a new generation of sustainable energy-storage devices, it is crucial to study and understand both the structure as well as dynamics of ions in the material on an atomic level.